1. Continuous Hot extration Equipment with heating mentle
Hot Extraction capacity 100ml flask cap 250ml with standard joint made from borosil glass with electrical
heated, thermostical control heating mentle
2. Conical Percolator Stainless steel cap 1000ml with lid, drain cock, stainless steel sieve 3 legged stand machine made.
3. Tincture Press
For making. Tinctures, decoction infusion etc. capacity 1ltr stainless steel inner
4. Hand Grinding Mill.
Table fixing with hardened grinding discs, provision for coarse and fine grinding
5. Disintegration Test Apparatus
Disintegration Test unit used for determination disintegration of time of tablets. A motorized shaft moves in an up & down direction at a frequency of 30 cycles per minute holds 6 glass tubes of standard size with stainless size with stainless steel wire gauge bottom. Cylinder moves up & down with standard dish inside in a 1 ltr. beaker filled of
distilled water which is maintained at 37oC, by thermostatically control hot plate.
6. Ball Mill
For mixing & grinding, electrically operated cap.2 Kg fitted with FHP motor, The Jar is
made of aluminum and having steel balls of different size.
7. Hand Operated Tablet Machine
Single punch for making tablet up to 1000 mg,size of die and punch is 6/12 mm, automatic
compression and ejection device, automatic feed, hoper SS.
8. Tablet Coating Pan Fabricated to technical shape from stainless steel complete with
hot blower, electric motor, starter indicator lamp,thermostat etc. available in 12" size.
9. Polishing Pan Detachable polishing pan for use with coating pan is
made of mild steel, painted and provided with inner lining of superior canvas cloth
10. Tablet Hardness Tester(Monsanto type) Brass chrome plates 0-20 Kg.
11. Tablet Hardness Tester (Pfizer type) Brass chrome plates 20 Kg fitted with dial indicator
12. Granulating Sieves.
13. Tablet Counter Small size
Device for 100 tablets, 9.5 mm. perforations, made to aluminum sheet with pouring lip and handle.
Approx. Rs 29,500 / pcsGet Latest Price
Temperature range 5degC to 50degC. Temperature controlled by Digital temperature indicator cum controller in the variation of +/-1degC. Chamber with 14 perforated trays. Chamber is provided with stainless steel water reservoir at bottom. Humidity from 90 to 95 % +/- 3 % (not adjustable) Double-walled inside made of anodized Aluminium/ stainless steel and outside. Mild steel painted in epoxy powder coating. To work on 220/230 volts 50 cycles A.C. only.
Chamber Size: 555 (W) x 910 (H) x 605 (D) mm Capacity: 308 ltrs.
a) Chamber & trays made of Anodized Aluminium
b) Chamber & trays made of highly polished Stainless Steel
i) Automatic 0-24 hours timer to regulate cyclic illumination conditions.
Ii) Automatic voltage stabilizer 3KVA (recommended)
Approx. Rs 1,600 / Piece(s)Get Latest Price
Laboratory Centrifuge Machine Digital /Non Digital offered by us offer multipurpose functionality in the laboratory environment for carrying out routine/ special work in medical & industrial laboratories. This table top centrifuge is very compact and feature robust construction. Its special features include transparent see through acrylic lid for angle rotor head, easy lid lock, step less speed controller, safety fuse & attractive front panel. We supply it with detachable metal carriers with up to 4000-6000 RPM.
Approx. Rs 55,000 / Piece(s)Get Latest PriceProduct Details:
|Minimum Order Quantity||1 Piece(s)|
Cabinet frame of ply-board covered with sunmica from outside. Work bench top of stainless steel. In this Bio Safety Cabinet Side and front door of work bench covered with acrylic . Motor & blower assembly to provide sufficient air pressure. HEPA filter efficiency 99.97% down to 0.3 micron. Pre-filter efficiency 99% down to 5 micron. Cock for gas. Front half opening collapsible acrylic door with gloves arrangement. Virus burnt out unit attachment. 20W flourscent tube light & 15/30W UV Germicidal Tube. Removable covers. With exhaust system.
Working area size 120 x 60 x 60 cm.
Portable laminar AIR FLOW FOR FIELD USE. Specially designed and developed for on field culture and analysis of specimens. MDF sturdy body with sunmica finish. acrylic covers on front & sides. front door height adjustable, removable base plate, carrying handle & shoulder strap for on-field carrying. 9 watt ultra violet germicidal/amp.
Biosafe Cabinet (Mild Steel) 60x60x60cm
Biosafe Cabinet (Mild Steel) 90x60x60cm
Biosafe Cabinet (Mild Steel) 120x60x60cm
Biosafe Cabinet (Stainless Steel) 60x60x60cm
Biosafe Cabinet (Stainless Steel) 90x60x60cm
Approx. Rs 45,000 / Piece(s)Get Latest PriceDesigned to store cadaverous under cool conditions to prevent decomposition. Double walled construction, outer made out of thick mild steelsheet duly finished in stoving enamel paint and inner made out of stainless steel sheet. The gap between the two is filled with glass wool for temperature insulation. Front opening covered with double walled door with magnetic gasket, lock & key and handle. Individual chambers are provided with independent locks with duplicate keys. Trays to carry dead bodies are provided with handles on both ends travel on rollers fitted on ball bearings for smooth movements. The refrigeration unit is fitted on the rear top. Temperature of +2oC to 4oC is maintained by hermatically sealed compressor unit and is controlled by an automatic electronic digital temp. controller-cum-indicator. Panel is provided with indicators & controllers etc. Completed with cord & plug. The unit is to work on 220V AC 50 Hz single phase. Capacity Temp. Voltage Stabilizer . Single Body 2° to 5°C 3KVA Two Bodies 2° to °C 4KVA Three Bodies 2° to 5°C 5KVA Four Bodies 2° to 5°C 8KVA Six Bodies
Approx. Rs 1,000 / Piece(s)Get Latest Price
We bring forth a wide variety of Heating Mantles which are extensively used in laboratories to apply heat to containers. Our Laboratory Heating Mantle is available with a sturdy aluminum body. Its epoxy powder finish makes it a distinguished product. The Heating mantle which we offer is best suited for round bottom flask. Proper electric wiring makes certain that no short circuit takes place. The high temperature range of 400 degrees Celsius makes our Heating Mantles ideal for industrial use.
Approx. Rs 85 / Piece(s)Get Latest Price
We specialized in manufacturing and supplying a wide range of Bunsen Burner with Stop Cocks. These Bunsen burner with Stop Cocks are one of the best laboratory instruments offered by our organization. Devices offered by us are manufactured by dedicated and experienced technicians, having years of experience. These Bunsen Burners offered by us are also fitted with stop Cock to balance the flame of the Burner.
Approx. Rs 50,000 / Piece(s)Get Latest PriceFume Hood (Cupboard)
Approx. Rs 40,000 / Piece(s)Get Latest PriceU. V. Chromatography inspection cabinet for viewing & detecting prepared substance on T. L. C. Plates and a number of other laboratory & investigation work. This U.V. Cabinet is fitted with two U. V. Tubes of different wave lengths & a floresence tube for visible light. An eye protective glass window is also provided on the top front for viewing the samples.
Approx. Rs 55,500 / Piece(s)Get Latest Price
This equipment has diversified applications in various industries such as Pharma, Chemical, Food, Drugs & Beverages, F.M.C.G., Biotechnology & Microbiology and Electronics etc.
· The environmental air is drawn by centre-balanced centrifugal suction blower through pre-filter and thrown onto work platform through High Efficiency H.E.P.A. filter, retaining particulate and biological contaminants larger than 0.3 microns.
· Complete structure made of stainless steel including inters square pipes and table top.
· All the compartment of the chamber is chemically sealed to prevent leakage/loss of air pressure. Front sash (door) is counter balanced sliding up & down.
· All various are available with U.V. Tube, Fluorescent Tube Light, Gas cock & Static Pressure Manometer.
Test Facilities for the following validations are available on request:
1. Particle Count
5. Light Intensity.
· size - 90 cms x 60 cms x 60 cms (3\'x2\'x2\')
Approx. Rs 24,500 / PieceGet Latest Price
Product Description:Consisting of a transformer 20 AMP (Series Model), S.S. furnace insulated with ceramic fiber and a wooden frame for glass parts. Thermocouple Pt/Re, Pyrometer etc.
Explore More Products