Approx. Rs 35,000 / PieceGet Latest Price
Flow Over Weir Or Open Channel Apparatus:
A 'WEIR' is the name given to concrete or masonry structure built across a river (or stream) in order to raise the level of water on the upstream side and to allow the excess water to flow over its entire length to the downstream side. Weirs may also be used for measuring the rate of flow of water in river or streams.
Different shapes of "WEIRS" generally used are sharp-crested weir, broadcasted weir and ogee shaped weir.
In the unit a centrifugal pump sucks the water from the sump tank, and discharges it to a small flow channel. The weir is fitted at the end of channel. All the weirs are interchangeable. The water-flowing over the weir falls in the collector. Water coming at from the collector can be directed to the sump or can be directed in to the measuring tank for measurement of flow.
 The unit is provided with following weirs:
(a) Sharp-crested weir.
(b) Broad-crested weir.
(c) Ogee shaped weir.
 Pump 1/2 H.P. monoblock.
 Flow measurement - Measuring tank calibrated water flow meter is used.
A technical manual accompanies the unit.
 Floor surface - 2.5 m x 1.5 m. 230 v, 5 amp supply with earthing connection
Approx. Rs 35,000 / EACHGet Latest Price
The Set-up consists of 2 pipes of different diameters, which are connected in parallel. Pressure tapings are provided on each pipe to measure the pressure losses with the help of a Differential Manometer. Control valves are fitted on each pipe, which enables to use one pipe at a time for experiment. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.
Ø To determine the losses due to fiction in pipes
Ø To determine the friction factor for Darcy Weis back equation
UTILITIES REQUIRED: -
Ø Water Supply & Drain
Ø Electricity Supply: Single Phase, 220 VAC, 0.5 kW
TECHNICAL SPECIFICATION: -
Ø Pipes (2 Nos.) : Material GI of ½ “ & 1” Diameter
Ø Pipe Test Section : Length 1 m
Ø Water Circulation : FHP Pump, Crompton / Sharp make
Ø Flow Measurement : Using Measuring Tank with Piezometer,
Capacity 25 Ltrs.
Ø Sump Tank : Stainless Steel, Capacity 50 Ltrs.
Ø Stop Watch : Mechanical / Electronic
Ø Control Panel : On / Off Switch, Mains Indicator etc.The whole Set-up is well designed and arranged in a good quality painted Structure
Explore More Products