Oscilloscope

Approx. Rs 8,000 / PieceGet Latest Price

Product BrochureProduct Details:

Low cost 10mhz digital oscillscope with CY MODE
1 Channel Oscilloscope

The best choice to replace an analogue oscilloscope

• The simple control panel is similar to an analogue oscilloscope
• Bandwidth : 10MHz
• Sample rate : 100MS/s
• 1-Channel
• 130,000 wfms/s waveform capture rate, easily capturing exceptional and low probability events
• 3.7" Colored LCD
• Compact case
• The Owon AS101 10MHz Bandwith, 1-Channel, 100MS/s Digital Oscilloscope retains the panel operation of an analog oscilloscope, enabling fast adoption for existing users of analog oscilloscopes. 130,000 wfms/s waveform capture rate which provides performance close to an analog oscilloscope, easily capturing exceptional and low probability events. The multilevel waveform grayscale displays different amplitude components. The panel controls allow for continuous adjustment of the sweep rate and vertical sensitivity.

Approx. Rs 8,000 / PieceGet Latest Price

Product Details:

DC-10 MHz Digital Oscilloscope 4.3 Inch ST16D Digital Oscilloscope for Student for Physics Teaching Technology Courses and Laboratory Scope A digital oscilloscope with a 10MHz bandwidth and XY mode is a standard piece of test equipment used to display signal waveforms and compare two different input signals against each other. Models are available in both portable handheld formats and benchtop versions

Approx. Rs 16,500 / PieceGet Latest Price

Product BrochureProduct Details:

Product Description

• Model: DSO-10100S Band Width: 100MHz, Real Time: 1GS/s
• Pluse with Trigger : Vertical Sensitivity:50mV/div-500V/din, Horizontal Time:50S/div; Trigger Sensitivity: 1V
• Trigger Level Scope: Internal ±5 div away from screen center, EXT±3V,EXT/5 ±15V
• Trigger Frequency: Meter: Reading Resolution , Trigger Sensitivity
• Accessories: HTC Instruments 100Mhz 2 Channel Digital Storage Oscilloscope Model - DSO-10100S With Signal Generator & LCD Display

Approx. Rs 23,000 / PieceGet Latest Price

Product Details:

CRO 30 is a Portable type advanced-class Oscilloscope with a bandwidth of DC to 30MHz designed with the emphasis on operability and portability and has following Features.

Wide Bandwidth : High Sensitivity : Large 6” Screen :

The instrument has a bandwidth from DC to 30MHz Sensitivity is 1mV/div
Employment of large square CRT Makes waveforms easier to observe.Employment of an Internal Graticule CRT Permits waveforms ALT TRIG : TV Synchronization : Auto Focusing :

CRT :

Specifications

observation to be made without parallax error.
Even an observation of two waveforms of different frequencies, the waveforms of the each cannel is stably triggered. Employment of a new TV Sync separator circuit allows the instrument to observe TV signals stably
Focusing shift is automatically corrected.

Type : Large 6” screen with internal graticule.
Approximate 12KV (2 KV) Acceleration potential. Phosphor P31 Standard graticule 8 x 10div (div=10mm) internal graticule focusing:
Possible (with automatic focus correction circuit)
Trace rotation : Present Brightness
Adjustment : PossibleZ-AXIS INPUT(INTENSITY MODULATION)

DC-Coupled, Positive-going signal decreases intensity: 5Vp-p Signal cause noticeable modulation at normal intensity : DC to 2MHz
Input Impedance : 33KOhm (type) [47k Ohms(type)]
Maximum Input Voltage : 30V (DC + Peak AC)

VERTICAL DEFLECTION SYSTEM (2 identical Channels)

Bandwidth and rise time
DC to at least 50MHz [30MHz] and rise time 7ns [17.5ns] or less DC to at least 7MHz and rise time 50ns or less at magnifier extends. The AC Coupled lower -3dB point is 10Hz or less.

DEFLECTION FACTOR

5Mv/Div to 5V/div in 10 Calibrated steps in a 1-2-5 Sequence.
Uncalibrated continuous control extends deflection factor to at least 12.5Volts per division in the 5Volts/div Position. X5 Magnifier increases sensitivity of each deflection factor setting to 1Mv/div.
Accuracy : ±3%
Additional error for magnifier : ±2%

Display Modes :

Input Impedance : Maximum Input Voltage : Input Coupling :

CH1, CH2 (normal or Invert) Alternate Chopped (approximate 250KHz) added.

Approximately 1MW in parallel with 25Pf
300V (DC + Peak AC) or 500Vp-p AC at 1KHz or less AC, GND, DC

HORIZONTAL DEELECTION SYSTEM

Time Base 0.2us/div to 0.2s/div in 19 calibrated steps in q 1-2-5 sequence. Uncalibrated continuous control extends deflection factor to at least 0.5 seconds per division in the 0.2sec/div position. X10mag extends maximum sweep rate to 30 ns/div [100ns/div] Accuracy : +3%

Additional error for magnifier : +2%

TRIGGERING SYSTEM

Trigger modes :

Automatic, Normal, TV (TV-H or TV-V)

Trigger source : Trigger Slope : TV sync polarity :

Specifications

Internal (CH1, CH2 V-MODE), Line, External +, -
TV (-)

Triggering Sensitivity and Frequency

 

Approx. Rs 90,000 / PieceGet Latest Price

Product Details:

Oscilloscope has a sample rate of 1GS/s and a high 200MHz bandwidth. Additionally, the oscilloscope has an ultra-thin body and a 7 inch high resolution color LCD. The SDS1202 contains 2 channels with a record length of 10K. Furthermore, 16 wave forms can be stored and with the use of the USB connection measurement results can be exported. Additionally, this scope supports SCPI, LabVIEW

Technical Specifications

· Bandwidth: 200 MHz · Analog Channels: 2 · Real Time Sampling: 1 Gsa/sec · Waveform Capture Rate: 30,000 wfms/s · Vertical Resolution: 8 bits · Vertical Scale: 1 mV/div to 10 V/div · Time base Scale: 2 ns/div to 50 s/div · Display: 7-inch WVGA (800x480) TFT LCD · Connectivity: USB Host